18
Setup Manual - Butler S2
Set the necessary parameters for the Butler S2. The factory settings for the IP
address is 192.168.123.1, be sure that no other device in the network uses this IP
address.
When setting up more then one Butler S2 with factory settings, con-
nect only one to the network, set a new IP address, then connect and
configure the next Butler S2.
Network parameters
Device Basics
Device Name
The device will be displayed with this name in the e:cue
programmer.
IP address
The IP address of the device (default: 192.168.123.1)
Subnet Mask
The netmask of the device (Default: 255.255.255.0)
Gateway address
The default gateway of the device (Default: no gateway)
MAC address
The physical address of the device (read only)
