Traxis DBS 3500, Operating Manual

Page: 22 / 23

Basic Operations
Ø
OK
—
Pause/Play game
Ø
Exit
—
Quit game and exit back to
“Game” menu.
3
Othello
²
Move highlight to “Setup” and press Volume
+/Volume - keys to select the game levels
(degrees of difficulty).
²
Move highlight to “Start” and press key OK
to start the game.
²
Move highlight to "Cancel” and press key
OK to draw back from the game.
²
Start the game:
Ø
/Volume -/Channel UP/Channel
Down
—
use these keys to guide
chessman.
Ø
OK
—
set chessman.
Ø
Exit
—
Quit game and exit back to
“Game” menu.
6.3 Default Value
When you press key OK in the “Default Value” item:
1 There will pop a dialogue for you to input the
password.The default password is “0000”.
2 After you input the correct password, it will
show a warning message to inform you “The
operation will load default and erase all the
channels that users added, continue?”. If you
select “Yes” , all the revised
parameters of the receiver will be reset to
default value. Please use this function carefully.
3 In step 1 and step 2, pressing key Exit can exit
out of this item without saving.
6.4 Software Upgrade
We offer the functions for users to connect receiver
(Master) to the other ones (Slave) via serial interface.
1 Connect the master receiver to the slave receiver using
a NULL modem cable. Enter "Software Upgrade" menu in
master receiver and press /Volume -
keys to switch upgrading mode.
Upgrading modes include: allcode / maincode /
radioback / defaultdb / userdb/ userback/ beep
2 Turn on slave receiver and there is no need to
change any setting.
3 Move highlight to “Start” master receiver and
press key OK to start upgrading.
4 Press key Exit to save the parameters and exit.
Upgrade by Satellite
This function can upgrade the software of satellite
receivers through signal lines from the satellite.
1 Select the satellite and TP or input the TP value
and download PID.
2 Then move the highlight to the [start] button and
press key [OK] to begin to upgrade.
3 Press key [EXIT] to close the window.
21