1.To avoid possible inquiry to eyes, it is harm to people's retina.
2.To avoid possible safety accident, do not use the flash light on the people who need a high degree
of attention.
3.To avoid fire or electrical shock, do not expose this product to rain or moisture.
4.To avoid short circuit, be sure the batteries contacts are securely packed and in accordance with
local provision when handling the batteries.
5.Please place the batteries and the parts which can be allowed mistakenly away from children.
6.Do not disassemble or maintain this product .Touching the internal high voltage circuit will cause
electric shock.
7.Remove batteries during long periods of non-use .
8. Please take out the batteries and stop using immediately in case of below:
1. This product is dropped or shocked seriously and the inner part of the product is bared.
2. If the battery leaks corrosive liquids, please take out the battery with gloves.
3. The product gives off strange smell, smokes or heats.
4. When the product is full charged (the charge lamp bright), press < >, flash will not firing
Ⅱ.
Warning
-
2
-
-
3
-
E
N
E
N
1
、
To avoid overheating and degrading the flash head, do not fire more than 20 continuous flashes.
After 20 continuous flashes, allow a rest time of at least 10 min.
If you fire more than 20 continuous flashes and then fire more
flashes in short intervals, the inner overheating prevention function may be activated to make
the recycling time about 8 to20 sec. If this occurs, allow a rest time of about15 min. and the flash
will then return to normal.
2
、
Using size-AA batteries other than the alkaline type may cause improper battery contact due to
the irregular shape of the battery contacts
3
、
Change the batteries should be aware below:
3.1
、
If you change the batteries after firing many flashes continuously,
3.2
、
Use a new set of four batteries of the same brand. When replacing the batteries, replace all four
at one time
3.3
、
Size-AA Ni-MH or lithium batteries can also be used.
4
、
If you set the flash coverage manually, make sure it covers the lens focal length so that the picture
will not have a dark periphery.If you use a commercially-available sync cord to connect the camera
to the Speedlite's PC terminal, set the flash zoom manually.
5
、
During stroboscopic flash, the shutter remains open until the firing stops. Use the formula below to
calculate the shutter speed and set it with the camera.
After
exceeding
the
number
of
flashes
，
multi
flash
immediately
.
be
care
that
battery
may
become
warm
or
hot.
.
Ⅲ
.
Caution:
Number of flashes ÷ Firing frequency = Shutter speed
For example, if the number of flashes is 10 and the firing frequency is5 Hz, the shutter speed should
be at least 2 sec.
