Ⅷ
、
Wireless flash
Master unit setting, when flash under master, can transmit signal to C automatically.
Slave unit setting, can accept C and travor signal.
-
18
-
-
19
-
E
N
E
N
10. Access to Canon camera menu.(Only Latest Canon camera)
.
We could operate the flash via newest Canon camera's menu that has ETTL function. Flash's
related parameter could be set b y “External flash function setting”and “External flash C.Fn
setting” on flash control menu: switch ETTL mode/manual flash mode and Multi flash, wireless
flash setting , Rear-curtain Sync, Exposure Bracketing ,Exposure Compensation, focal length
and advanced option function etc.
12. Modeling light function
Press down the camera's aperture preview button ,flash will send out continuous flash
lasting one second.
Note: please control the flash fired less than 10 times, should let flash have a rest about
10~15 minutes to avoid heat or damage.
13. PC synchronous port (for input)
By connecting to the PC synchronous port, you can make the flash synchronously.
14. Power saving mode
Please press C,Fn-24 custom function setting.
1. Set the master unit
Set the speedlite wireless select to master.Setting method: press the < >button by select
dial to master, then press the select setting button to confirm. Press the ZOOM button , (CH),
master flash icon or
（
R AT I O
）
will firingto the communication channel or slave setting ,at
this time ,you can set slave unit communication channel number(1,2,3,4)or slave unit group
(A,B,C) via select dial, then press select setting button to confirm setting .
11.Volume adjustment
By
pressing
< >
button
for
three
levels
to
adjust
the
volume
,
could
be
setted
from
C
.
Fn
"
Custom
function setting”and ON or OFF for the voice from C.Fn-20.
