The entire LCD panel blinks.
1.The wide panel has been pulled out for bounce flash, Retract the wide panel.
The periphery or bottom of the picture looks dark.
1. When you set the flash coverage manually, the setting was a higher number than the lens
focal length, resulting in a dark periphery.Set the flash coverage that is a lower number than the
lens focal length or set it to auto zoom.
2. If only the bottom of the picture looks dark, you were too close to the subject. If the subject is
closer than 2 m/6.6 ft, tilt the flash head downward by 7° (bounce flash).
The flash exposure is underexposed or overexposed.
1. There was a highly reflective object (glass window, etc.) in the picture. Use FE lock.
2. The subject looks very dark or very bright.
Set flash exposure compensation. For a dark subject, set a decreased flash exposure. And for a
bright subject, set an increased flash exposure.
-
32
-
E
N
The
latest
version
of
this
manual
can
be
obtained
from
http
://
www
.
travor
.
cn
.
The
functionality
of
this
manual
is
obtained
in
accordance
with
the
test
conditions
of
company
.
Without
notice
if
the
design
and
specifications
are
changed
.
