Page
14
Remark:
The control module is splash-proof so that you can align the system when it is raining. We recommend
that you remove the control module following each alignment of the system to prevent theft and possible
water damage.
3.8
Control Module Charging
If you get the message:
Or notes during start-up that the battery needs to be recharged
You can recharge the control module with the 230-24V power adapter
Plug the power adapter jack plug (round plug) into the loading
entrance of the control module and insert the plug in the 230 Volt
socket.
The display of the control module lightens and indicates the charging mode and capacity:
An empty to full cycle lasts up to 125 minutes
The battery symbols [====] indicates the capacity of the battery.
[= ] average use 0-15 minutes
[== ] average use 15-30 minutes
[=== ] average use 30-45 minutes
[====] until 60 minutes
After charging the message “charging done” will appear in display
BATTERY TO LOW
PLEASE CHARGE
FIRMWARE v***
BOOTING [= ]
R7 RECREATION
CHARGING BATTERY [= - - - ]
R7 RECREATION
CHARGING DONE
