9
HOW TO VACUUM BOTTLES
1.
Place the appliance on a flat, dry surface
and plug the power cord into a either 240V or
12V DC power source.
2.
Insert the bottle stopper into the neck of
the bottle, leaving at least 2.5cm between
the contents and the rim.
3.
Insert one end of the accessory hose into
the air-intake on the appliance.
4.
Insert the male adaptor end into the lip
of the bottle stopper (see image below).
5.
Press “Canister” button to begin the vacuum
process for either canisters or bottles.
The motor will run until vacuum process
is complete.
6.
When light indicator turns off, gently twist and
remove accessory hose from appliance and
bottle stopper.
7.
Simply twist and pull up on the bottle stopper
to release the vacuum.
IMPORTANT: Remember to remove the
accessory hose from the accessory port of
your vacuum sealer once finished.
USER MANUAL AND PRODUCT SPECIFICATIONS
Summary of Contents for PRI5590DP
Page 1: ...Part No PRI5590DP USER MANUAL AND PRODUCT SPECIFICATIONS VACUUM SEALER 12V 240V DUAL POWER...
Page 13: ...13 Cutter Rack Lower Gasket Sealing Strip USER MANUAL AND PRODUCT SPECIFICATIONS...
Page 16: ...TC002 Distributed by Companion Brands Bundoora Victoria 3083 www companionbrands com au...
