background image

OUR PRODUCTS

LIQUID RING
VACUUM PUMPS

LIQUID RING COMPRESSORS

ROTARY VANE VACUUM PUMPS

ROTARY VANE VACUUM SYSTEMS

MEDICAL SYSTEMS (NFPA99)

PACKAGE VACUUM SYSTEMS 
WITH PARTIAL OR TOTAL 
SERVICE RECIRCULATION

CUSTOM ENGINEERED
VACUUM SOLUTIONS

This manual applies to TRAVAINI PUMPS USA
liquid ring pumps single stage series TRM, TRS,
TRV, double stage series TRH, compressors
series SA and systems series water sealed and
oil sealed (DynaSeal

TM

) Systems, which utilize

above pump series. (Please see section 18 or 19
for details per taining to systems).

NOTE: Unless other wise specified, the term
pump used throughout this manual means also
pump/motor assembly or system type water
sealed or oil sealed (DynaSeal

TM

). 

MANUFACTURER:

TRAVAINI PUMPS USA

200 Newsome Drive
Yorktown, VA  23692
Telephone: (757) 988-3930
Fax:

(757) 988-3975

Website: www.travaini.com

WARRANTY:

All products manufactured by TRAVAINI PUMPS
USA are guaranteed to meet the conditions
listed on the general terms & conditions of sales
and/or conditions listed on the order confirma-
tions. Failure to strictly adhere to the instructions
and recommendations listed in this manual, will
void the manufacturer’s warranty. Detailed
warranty policy can be found in Section 21.

PROPRIETY DOCUMENT:

This document and the information enclosed
herein are proprietar y to Travaini Pumps USA and
must, along with any copies, be returned upon
demand. Reproduction or use of any information
disclosed herein, or the manufacture of any
assembly or par t depicted herein is permissible
only to the extent expressly authorized in writing
by Travaini Pumps USA on and for which this
document is provided.

In preparing this manual, ever y possible effor t has been made
to help the customer and operator with the proper installation
and operation of the pump and/or system.  Should you find
errors, misunderstandings or discrepancies please do not
hesitate to bring them to our attention.

OPERATING
MANUAL FOR
INSTALLATION,
START-UP AND
MAINTENANCE
FOR LIQUID
RING VACUUM
PUMPS,
COMPRESSORS
AND SYSTEMS

“Proven Designs”

Liquid Ring & Rotar y Vane Vacuum Pumps and Systems

Summary of Contents for SA Series




























Reviews: