TRAUMA F/X EMITT-ASL, User Manual

Page: 30 / 54

T R O U B L E S H O O T I N G
25
Chapter 6: Troubleshooting & Repair
Contact TraumaFX Technical Support at: MATTsupport@traumafx.net , or 1-800-
200-7465 if trouble-shooting steps do not resolve an issue you are experiencing.
Issue Actions
Simulated bleeding is not
working
Check batteries:
 Charge EMITT-ASL battery
 Charge the TSR transmitter battery
 Ensure all batteries are fully seated or locked into
position.
 Check to see if switch tower green LED is on
TSR Transmitter:
 Check LCD display on front to verify that it is
functioning and paired with EMITT-ASL
 Check battery charge, replace if low
Fill the EMITT-ASL with blood:
 Verify blood bladder is full by connecting gravity
fill bucket to EMITT-ASL and topping off
reservoir
 Test bleeding
EMITT-ASL does not fill
with simulated blood
Faulty quick connectors
 Test each quick connector by pressing in the valve
on the connector to see if air and fluid can pass
through
Clogged filters
 Filter in bucket or waist plate might be clogged
with debris
 If so, remove, clean and reinstall or replace filter
Unable to fill with blood
 If cavitations (air pockets) arise, the hose can be
primed again using objects such as Allen keys or
Chapter
6