TRAUMA F/X EMITT-ASL, User Manual

Page: 17 / 54

G E T T I N G S T A R T E D
12
4. Fully recharge all batteries before each training exercise. This is
indicated by a solid green light on the charger for each battery.
5. Store batteries indoors, away from extreme temperatures (not above
120°F or below 38°F).
6. Only charge TraumaFX-related batteries using the approved chargers
supplied with the TraumaFX system.
Installing and Removing the Batteries
Installing the EMITT-ASL Battery
1. Select one (1) 100% fully charged
Makita Lithium-Ion battery.
2. Open the battery compartment door
on the EMITT-ASL unit by twisting
the two (2) latches on the battery door
(Figure 5)
counter-clockwise
.
3. Insert the fully charged battery into
the battery compartment (Figure 6).
4. Push the battery into the battery
compartment until it audibly ‘clicks’
into place (Figure 6).
5. Close the battery compartment door
and secure it by twisting the two (2)
latches
clockwise
until tight (do not
over tighten).
Removing the EMITT-ASL Battery
1. Open the battery compartment door on
the EMITT-ASL unit by twisting the
two (2) latches on the battery door
(Figure 5)
counter-clockwise
.
2. Press the white, push button (Figure 7)
located on the battery to remove it
from the EMITT-ASL unit.
Figure 5
Figure 6
Figure 7