External Hardware Features
Chapter 2
Trapeze Mobility Point Installation Guide
Version 2.1
12
Confidential—Beta Draft—
Confidential—Beta Draft—12 May 04
Table 3. MP Access Point LEDs—MP-241, MP-252, and MP-262
LED
Appearance
Meaning
Health
Solid green
All the following are true:
• Management link with an MX switch is
operational.
• MP access point has booted.
• MP access point has received a valid
configuration from an MX switch.
• At least one radio is enabled or is in sentry
mode.
Solid amber
MP access point is waiting to receive boot
instructions and a configuration file from an MX
switch.
Slowly alternating
green and amber
MP access point is booting and receiving its
configuration file from an MX switch. After the
access point boots and receives its configuration,
this LED appearance persists until a radio is
enabled or is placed in sentry mode.
Radio 1
Radio 2
Solid green
A client is associated with the radio.
Blinking green
Associated client is sending or receiving traffic.
Blinking amber
Non-associated client is sending or receiving
traffic.
Alternating green and
amber
Radio is unable to transmit. This state can occur
due to any of the following:
• The radio is in sentry rogue detection mode.
• Excessive radio interference in the
environment is preventing the radio from
sending beacons.
• The radio has failed.
Solid amber
Radio is disabled.
Unlit
No radio is present or, if a radio is present and
enabled, no clients are associated with the radio
and there is no traffic activity.
