U
SING THE DIRECT FUNCTIONS
Operator Manual Rev 1.1
21
Display adjustments
Short/long push on
Adjust
–
display adjustments
Brightness
Press key 1 then use joystick (up & down) to adjust the brightness.
Validate by pressing the joystick knob.
Contrast
Press key 2 then use joystick (up & down) to adjust the contrast.
Validate by pressing the joystick knob.
Saturation
Press key 3 then use joystick (up & down) to adjust the saturation.
Validate by pressing the joystick knob.
Hue (NTSC only)
Press key 4 then use joystick (up & down) to adjust the hue.
Validate by pressing the joystick knob.
Colorimetry
Press key 5 then use joystick (up & down) to adjust the colorimetry.
D65 – D56 – FB (full bright) – D65 adj – D56 adj.
Validate by pressing the joystick knob.
Aspect ratio & anamorphic desqueeze
Press key 6 then use joystick (up & down) to select the aspect
ratio: 1.78:1 – Ana 2x – Ana 1.3x – 1.33:1
Validate by pressing the joystick knob.
Profile (Log profiles)
Press key 7 to enter into the input profile sub-menu.
Linear (default value)
Rec709
S-Log
S-Log2
Canon-Log
C-Log (with EI adjust)
About colorimetry:
D65: the brightness and white point are calibrated in D65 (6500K at 200Nits)
D56: the brightness and white point are calibrated in D56 (5600K at 200Nits)
FB (full bright): color calibration is deactivated - backlight dimmer can be adjusted in menu Tech
D65 adj: white point is calibrated in D65 (6500K) - backlight dimmer can be adjusted in menu Tech
D56 adj: white point is calibrated in D56 (5600K) - backlight dimmer can be adjusted in menu Tech
