Page 6
Item
Description
Plug-N-Play
28-____-06
Toll Class – Night Service
Voice Mail Port 1
9=Disable
28-____-06
Toll Class – Night Service
Voice Mail Port 2
9=Disable
28-____-06
Toll Class – Night Service
Voice Mail Port 3
9=Disable
28-____-06
Toll Class – Night Service
Voice Mail Port 4
9=Disable
Form 28 – Extension Number – 06
Toll Classification – Night Service
Like the previous forms listed, you need to enter the extension numbers
that are connected to voice mail.
Note regarding Form 28: The entries for toll restriction are designed
as a preventative measure to prevent possible toll abuse by outside
callers. The programming listed on forms 28-Extension Number-05
and 28-Extension Number-06 above will prevent the voice mail
system from dialing any outside calls. If your application requires
the use of a pager(s) you may choose to set the toll restriction levels for
the voice mail at 0 or build an appropriate toll restriction table for the
voice mail.
Form 29 – Circuit Number – 02 - Equipment Type
Please note that this form uses the circuit number (cabinet-slot-circuit)
and NOT the extension number of the voice mail port. Refer to the
entries and instructions from page 3 of this booklet.
Item
Description
Plug-N-Play
29-____-02
Equipment Type
Voice Mail Port 1
8=Voice Mail Port
29-____-02
Equipment Type
Voice Mail Port 2
8=Voice Mail Port
29-____-02
Equipment Type
Voice Mail Port 3
8=Voice Mail Port
29-____-02
Equipment Type
Voice Mail Port 4
8=Voice Mail Port
Note: Setting the equipment type to Voice Mail Port causes the SK-
824 to send proper integration digit strings to the voice mail system and
proper operation of Message Waiting.
Page 11
I
n the Chains section everything should be blanks, except for Done,
which should be set to 999 and Delay, which should be set at 0. User
The substance of the notification templates should be as follows
(referring to the lower portion of the Notification screen:
Message Waiting On Template:
Message Waiting Off Template:
Message Waiting Template Notes:
Default Plug and Play Systems
All TMS-100 systems configured as Plug and Play have Message
Waiting ON and Message Waiting OFF codes enabled (Enable = YES).
Note: On TMS-100 Voice Mail systems User ID 17 and User ID 18
do not have the Message Waiting ON codes enabled. This is due
to the fact that TMS-100 Plug and Play voice mail systems are
configured as if they are connecting to a SK-824 telephone
system.
Title:
MESSAGE OFF
Type: PICKUP
Variable:
Method:
7072%U
Enabled
MTWTFSS
From
To
Notify
After
Continue
Every
Max Times
YES
YYYYYYY
00:00
23:59
0 min
60 min.
1
Title:
MESSAGE ON
Type: NORMAL
Variable:
Method:
7071%U
Enabled
MTWTFSS
From
To
Notify
Continue
Max Times
YES
YYYYYYY
00:00
23:59
0 min
60 min.
1
MESSAGE ON
SMTWTFS
00:00-23:59
0 min/60 min
MESSAGE OFF SMTWTFS
00:00-23:59
0 min/60 min
<DISABLED>
<DISABLED>