Issue 2.0 December, 1995
Hold
(Continued)
Intercom Calling
Description:
You may call other stations within the Superkey
®
system.
1. Lift Handset.
2. Dial the station with whom you wish to speak.
3a. If the station is idle, it will ring.
3b. If the station is busy the system will return busy tone.
Note
: If the station is busy or does not answer, you may activate
message waiting on the called station by dialing
[6]
, while
listening to the ringback tone or busy signal. If you are setting
a message on another single line telephone, their telephone
will ring periodically to indicate a message waiting. If they
answer the phone during the periodic ringing cycle, your
telephone will be rung. If the station that you leave a
message is a Superkey
®
Electronic Telephone set, the
MESSAGE WAITING lamp will flash to indicate a message
waiting. They may contact you by lifting the handset and
pressing the Message Waiting button.
12
3. Press hookswitch. You will be connected to the call.
OR
1. Lift Handset.
2. Dial
[7]
,
[2]
. You will be connected to the call.
To retrieve a call held by another station:
1. Lift Handset .
2. Dial
[*]
,
[3]
, followed by the station number that placed the call on
hold.
To retrieve a specific CO line on hold:
1. Lift Handset .
2. Dial
[*]
,
[1]
, plus the line number (1-8 on SK-824, 01-40 on SK-
200) that you wish to retrieve.
Note
: The codes for pickup of calls from other stations and lines are
Call Pickup Codes. For more information, see Call Pickup in
this users' guide.
Call Pickup
Description:
Call Pickup allows you to answer a call that is ringing
at a location other than your own telephone.
Types:
Incoming CO Line
Group Pickup
Station Pickup
Department
All Pickup
Incoming CO Line.
A CO line is ringing the system.
1. Lift Handset and dial
[*]
,
[1]
, plus the line number that is ringing.
2. If the line is ringing, you will be connected to it. If it is busy, you
will receive busy tone. If it is idle, you will be connected and will
hear CO dial tone.
Group Pickup.
A call is ringing one or more stations in a group.
1. Lift Handset and dial
[*]
,
[2]
, plus the group number that you wish
to pick up (1-8).
2. If a call was ringing a station in the group, you will be connected
to the call. If no call was ringing, you will receive busy tone.
Station Pickup.
You want to pick up a call that is ringing a specific
station.
1. Lift Handset and dial
[*]
,
[3]
, plus the station number that you wish
to pick up.
2. If the station was ringing, you will be connected to the caller. If it
was not ringing, you will hear busy tone.
Department Pickup.
This allows you to pick up a call to another
station within your own station group.
1. Lift Handset and dial
[*]
,
[4]
.
3. If there was a telephone ringing in your group, you will be
connected to the caller. If not, you will hear busy tone.
All Pickup.
Covers all situations above.
1. Lift Handset and dial
[*]
,
[1]
,
[*]
.
3. You will be connected to the caller. If there is not a CO line
ringing or a station ringing, you will hear busy tone.
Note: If there is more than one call ringing in any situation listed
above, you will be connected to the first call that was
established (the oldest ringing call).
5
