Battery powered mode:
6VDC 4*AAA batteries
BEFORE YOU START
7
6
BEFORE YOU START
Setting Date and Time
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that
is stored in the memory. (year :2000—2050,time:24 H)
1
.When the unit is off,
hold pressing “SET”
for 3 seconds to enter
the mode for year
setting.
2
.Press the “MEM” to
change the [YEAR].
3
.When you get the
right year, press
“SET” to set down
and turn to next step.
START
STOP
START
STOP
START
STOP
1
.
Slide off the battery cover.
2
.
Install the batteries by matching
the correct polarity, as shown.
3
.
Replace the cover.
Remove batteries if the device is not likely to be used for some time.
The old batteries are harmful to the environment, so please disposal with other daily trash.
Remove the old batteries from the device and follow your local recycling guidelines.
CAUTION
Replace the batteries whenever the below happen
The shows
The display dims
The display does not light up
Do not dispose of batteries in fire. Batteries may explode or leak.
In order to achieve the best performance and protect your monitor,please use the
authorized / specified battery, which complies with CE safety standard.
Installing and Replacing the Batteries
