background image

23

22

PROBLEM SYMPTOM CHECK THIS

REMEDY

No power

Low

batteries

Error

message

Display will not 
light up.

Batteries are exhausted. Replace with new batteries

Insert the batteries 

correctly

.

Replace with new batteries

Batteries are inserted

incorrectly.

Display is dim or 

show

Batteries are low.

E 1 shows

E 3 shows

E 4 shows

EExx,shows on 

the display.

A calibration error

occurred. 

(XX can

be some digital symbol,

such as 01, 02,etc., if 

this similar situation 

appear, all belong to 

calibration error.)

Retake the measurement.

If the problem persists,

contact the retailer or our

customer service 

department for further 

assistance.Refer to the 

warranty for contact 

information and return 

instructions.

The treatment of the

measurement failed.

E 2 shows

The cuff is too tight 

or too loose.

Refasten the cuff and then

measure again.

The monitor 

detected motion 

while measuring.

Movement can affect the

measurement.Relax for a 

moment and then 

measure again.

Relax for a moment and

then measure again.

The measurement 

process does not 

detect the pulse 

signal.

Loosen the clothing on

the arm and then 

measure again. 

Warning

message

Relax for a moment.

Refasten the cuff and then

measure again. If the

problem persists, contact

your physician.

out  shows

Out of measurement

range

Why does my blood pressure 

fluctuate throughout the

 

day?

Is the result the same 

if measuring on the 

right arm?

Why do I get a different 

blood pressure at home 

compared to the hospital?

1. Individual blood pressure varies 

multiple times everyday. It is also affected 

by the way you tie your cuff and your 

measurement position, so please take the 

measurement under the same conditions.

2.If the person takes medicine, the 

pressure will vary more.

3.Wait at least 3 minutes for another 

measurement.

The blood pressure is different even 

throughout the day due to weather, 

emotion, exercise etc, Also, there is the 

“white coat” effect, which means blood 

pressure usually increases in clinical 

settings.

What you need to pay 

attention to when you measure 

your blood pressure at home: 

If the cuff is tied properly. 

If the cuff is too tight or too loose.

If the cuff is tied on the upper arm.

If you feel anxious.

Taking 2-3 deep breaths before 

beginning will be better for measuring.        

Advice: Relax yourself for 4-5 

minutes until you calm down.

It is ok for both arms, but there 

will be some different results for 

different people. We suggest you 

measure the same arm every time.

    This section includes a list of error messages and frequently  

asked questions for problems you may encounter with your blood  

pressure monitor. If the products not operating as you think it 

should, check here before arranging for servicing.

AC adaptor is inserted

incorrectly.

Insert the AC adaptor 

tightly.

TROUBLE SHOOTING

ABOUT BLOOD PRESSURE

Summary of Contents for TMB-1776-B


















Reviews: