9
8
LCD display
Tips:
Inflating and measuring.
Start the Measurement
2.
In this manual, the measurement of User 1 as an example.
Press the User 1 button to turn on the monitor and it will finish the
whole measurement, and then save the measure data for User 1. The
same to the User 2.
Adjust the zero . If the
measure data don’t upload to
the bridge in time, the icon
will display.
Press the User 1 to power off , otherwise it
will turn off within one minute.
Display and save the results will
transmit to the bridge through the
wireless.
Press the Guest button to turn on the monitor and it will finish the whole
measurement for Guest, but not save the measurement data.
A.when finish the whole measurement, press another button ,the blood
monitor will begin measure again.
B.If the blood monitor not connect with bridge, the icon of will display.
Maximum 60 records are both for User 1 and User 2.
1.
When the monitor is off,
press the User 1 button to turn on the monitor.
3
Please proceed to activate/synchronize before initial use of this equipment or when
the measurement unit is changed. When the equipment is OFF, press and hold
“GUEST” button to enter Activation / Synchronization Interface. After successful
activation/synchronization, the equipment will display and transmit the measuring
results after each measurement.
Activation
/synchroniz
ation is
proceeding
The
measureme
-nt data is
uploading
The data
has been
uploaded
successfully
CAUTION
Interference may occur in the vicinity of equipment marked with the following symbol
. And LS802-E may interfering vicinity electrical equipment.
Sensitive people, including pregnant women and those who implanted medical elec-
tronic instruments, should avoid using the unit whenever possible.
Keep the monitor at least 20 centimeters away from the human body (especially the
head) when the data transmission is proceeding after measurement.
To enable the data transmission function, this product should be interconnected with
Bridge in RF 915 MHz network.
How to mitigate possible interference?
1. The range between the device and the Bridge should be reasonably close, from 1
meter to 10 meters. Please ensure no obstacles between the device and the Bridge
so as to obtain quality connection and to lower the RF output range.
2. To avoid interference, other electronic devices (particularly those with wireless
transmission / Transmitter) should be kept at least 1 meter away from the monitor.
Wireless Transmission
Module No.
Frequency Range
Output Power Range
Supply Voltage
AW4431_915
915 - 918.5 MHz
+1 dBm
3.3V
When there is
no record
MEASUREMENT
MEASUREMENT
