7
Initial Start-Up
6
Insert the Batteries
Open the battery door in the back of the scale.
Remove insulating strip from beneath the battery (if
fitted) or insert batteries (4 x 1.5V AAA) observing the
polarity signs (+ and -) inside the battery compartment.
* The digits “8888” will be shown on the LCD.
Close the battery door and wait until the digits
“0.0lb” are shown on the LCD.
CAUTION
When the symbol “Lo” appears, the device will power off in three seconds. Then you shall replace with a
new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with
the new one.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries.
With original SENSE ON patent technology, the scale
will automatically switch on as you step on the platform
barefooted.
When your scale is successfully connected to your smartphone and the WiFi connection
is ON, it will process data transmission automatically.
(
Please refer to Data Transmission for more details.
)
Daily Measurement
Stand still and keep full contact with the scale, until the weight data on the LCD will be
locked. The analysis results(Body Fat, Total Body Water, Muscle Mass, Bone Mass)
will be displayed on APP.
Start Measuring
Users Management
The body fat analyzer GBF-1717-W supports multiple users (Up to 4). You may follow
below instructions to assign User ID.
1.Press One User key(ID 1 to 4)
2.Take a Measurement
Take a measurement on the scale to record your information. Your own profile will be
created on APP, you can check it anytime.
