Transtech iPOSTER P1.9, User Manual

Page: 7 / 65

6
Personnel
This installation must be performed by authorized and qualified technical personnel
only. Before the installer begins with the assembly, he must be convinced of the
completeness of the scope of supply including the required accessories. The installer
may only use the prescribed network cables, please see the cabling in this manual.
There must be a security officer who is responsible for the security at diverse tasks
during the installation.
Attention
The installation should be performed only after you are thoroughly familiar with all of
the proper installation instructions and safety checks. This manual contains
fundamental information that should be observed in connection with installation,
start-up, operation and maintenance of the LED video display. If you do not follow
these instructions, it increases the risk of hazards and injury to the user.
If you have
any questions during the installation, please contact Transtech LED Co.,Ltd.
Transtech LED Co.,Ltd shall not be liable for personal injury or damage to materials
caused by failure to observe this warning and safety information of this manual.
Furthermore Transtech LED Co.,Ltd cannot be held responsible for damage or injury,
caused by incorrect, inadequate or unsafe use, maintenance or installation of the
entire system. The liability as well as the effects of the same will become void if other
than genuine parts are used.
Before work on the system, the power must be disconnected, and the system must be
checked for absence of power and secured against further connection power.
All repairs of the system may only be carried out by Transtech LED Co.,Ltd respectively
by authorized and qualified technical personnel.
Certification
•
CE
• FCC
• ETL
• TUV
• CCC