1800 816 277
www.tti.com.au
9
Product HandBook
VersatileBoom™
VersatileBoom Set up
NOTE: Ensure the pump system is switched off and depressurised when connecting
the supply hose.
1. Connect the supply hose to the discharge port of the spray pump or delivery hose. Ensure the spray
system’s pump is switched off or isolated when connecting the VersatileBoom’s supply hose.
2. For one of the outlet ports of the three adjustable nozzles, insert the filter into the port body as shown in
Figure 5.
Figure 5 – Adjustable spray nozzle installation
3. Insert the nozzle tip into the nozzle cap, then press in the sealing washer.
4. Push the nozzle cap assembly onto the outlet port body and rotate 90 degrees to lock it into place.
5. Repeat steps 2 to 4 for the remaining two adjustable nozzles.
6. For one of the off-centre end jets, insert the brass nozzle tip into the steel nozzle cap, then press in
the sealing washer, refer to Figure 6.
