TransTank Versatile Boom Operator'S Handbook Manual Download Page 5

1800  816  277

www.tti.com.au

5

Product HandBook

VersatileBoom™

General Safety Instructions

1.  This unit is designed and manufactured solely for the purpose of spraying herbicides and pesticides, or 

water for firefighting.  Under no circumstances should it be used for any other purpose.  It must never be 
used in conjunction with fuel or similar materials. 

2.  Only authorised and trained personnel are to operate this equipment. Operators must have read and fully 

understood this manual before operating the VersatileBoom. 

3.  Do not operate the VersatileBoom anywhere near bystanders, livestock, watercourses or any non-

targeted vegetation that may be in danger from spray drift contamination. 

4.  Wind direction and speed must be taken into account, as windy conditions may endanger the operator or 

damage to adjacent non-target vegetation.  Avoid spraying on hot and sunny days or when wind speed 
exceeds 6.5km/h. 

5.  Do not operate this equipment while under the influence of alcohol or any drugs that could impair your 

capabilities in any way. 

6.  Personal Protection Equipment (PPE) appropriate to the chemicals being used must be worn at all times 

when operating the VersatileBoom.  As a minimum, the PPE should include coveralls, gloves and boots.  A 
face shield and PVC apron are recommended depending on the task. It is recommended that the following 
documents should be read and understood by the operator: 

•  Australian Standard for Chemical protective clothing AS3765 

•  Australian Standard for Respiratory protection devices AS1715 

7.  Ensure the capacity of the vehicle is suitable for the loaded mass of the spray unit and VersatileBoom. 

Refer to the vehicle’s operator manual for safe working loads, correct securing points and relevant safety 
instructions.  Do not exceed the carrying and braking capacity as specified by the vehicle manufacturer. 

8.  The VersatileBoom must be securely mounted on the vehicle.  Ensure all fasteners are tightened and 

secure before operation. 

9.  Do not disconnect any hoses, nozzles or filters while the equipment is operating. Disconnecting any 

components while under pressure may result in uncontrolled fluid discharge which may be hazardous. 

10.  At completion of the operation, switch the pump off and relieve any residual pressure by opening a spray 

boom valve or other device, such as a spray gun trigger. 

11.  At completion of the operation, decontaminate the VersatileBoom and spray system.  Drain any residue 

chemicals and store in a sealed container.  Flush the system with fresh water and dispose of any unwanted 
chemicals and tank rinse residue in accordance with current environmental and workplace health and 
safety regulations. 

12.  Any unauthorised modifications to this equipment may affect its function and create a serious safety risk.  

Any unauthorised modifications will void any warranty on the unit.

Summary of Contents for Versatile Boom





















Reviews: