1800 816 277
www.tti.com.au
18
Product HandBook
TopCrop
™
Figure 7 – SuperReel Operation
Compact Spray Boom Operation
WARNING: Before commencing spraying, plan the work effectively
to minimise potential contamination of adjacent areas.
The optional Compact Spray Boom, once calibrated for the task, does not require any adjustments prior
to operation. The spray boom is operated as follows:
WARNING: Do not spray in windy conditions, where spray drift
contamination may occur. Spray drift can be reduced by lower nozzle
height, lower pressures or by fitting larger nozzles.
•
Position the vehicle at the starting point of the operations area.
NOTE: Ensure the solenoid operated isolating valve for the boom is
CLOSED.
•
Ensure the cable-mounted switch to the solenoid actuated spray boom valve is set to OFF.
•
Start the pump and set the engine speed and the pressure regulator to the correct setting as determined
during calibration. The fluid will now be circulating through the system and returning to the tank via the
bypass circuit.
