1800 816 277
www.tti.com.au
12
Product HandBook
TopCrop
™
TopCrop Operating Instructions
Before first use
Your TopCrop Field Sprayer is delivered fully assembled and ready to be fitted onto your vehicle. If a Compact
Spray Boom has been optioned, this will be supplied separately, ready for mounting to the TopCrop’s frame
once the unit is mounted onto the vehicle. Before use, the TopCrop needs to be set up using the following
instructions:
•
Complete the warranty registration online at www.tti.com.au/warranty-registration, or use the Warranty
Registration Card at the back of this handbook.
•
Store this handbook, along with the Tank Quality Check Form and pump unit’s manual in a safe and easily
accessible place for future reference.
WARNING: The operator must fully understand all aspects of this
handbook. Do not operate the TopCrop if you are unfamiliar with its
operation until you have read this handbook.
•
Read and thoroughly understand this handbook, paying particular attention to all safety requirements,
before using the TopCrop for the first time.
•
Check that all fittings, valves, hoses and electrical leads are secure following transit, and are not
damaged in any way.
•
Inspect the tank for any damage or abrasions that may have occurred during transit.
CAUTION: The unit must be securely mounted to the vehicle. Failure
to do so may result in the unit moving or falling off the moving vehicle.
Warranty is conditional on the unit being correctly mounted.
•
Position your TopCrop sprayer onto the vehicle and mount securely to the tray. If using tie-down straps,
they must be rated to at least the total mass of the unit when filled with fluid. Alternatively, the integrated
tank frame may be bolted to the vehicle.
•
If a Compact Boom has been optioned, fit the mounting brackets to the TopCrop frame. The brackets
have multiple mounting points for the boom, to enable optimum boom height, depending on the vehicle
tray height.
•
Refer to the supplied pump unit’s manual and prepare the engine for use, such as filling its tank with fuel.
CAUTION: Ensure any electrical connections are configured correctly
to prevent shorting or reverse polarity. Warranty is conditional on
the electrical systems being correctly connected.
•
When optioned with the SuperReel, connect the supplied electrical cable to the Anderson plug at the
base of the SuperReel and connect the other end to the vehicle’s battery (via alligator clips).
