1800 816 277
www.tti.com.au
12
Product HandBook
GlidePath
™
Figure 3 – Optional Remote Control Solenoid Operated Switch Units
•
If the optional Foam Marker Kit is provided, install the electrical cable and connect it to the vehicle’s power
supply via the cable’s plug, refer to Figure 4.
Figure 4 – Optional Foam Marker Kit Electrical Cables and Controller
•
It is recommended that at first use, the GlidePath is filled with water for calibration purposes and for the
operator to become familiar with the characteristics of the unit. Refer to the Calibration Procedure to set
up the unit for first use; and each time there are different spray parameters required.
Filling the GlidePath Tank
WARNING! Ensure the filling area is in an open, well-ventilated space if filling with
chemicals. Follow the instructions provided with the chemicals or the applicable
Safety Data Sheet.
Mixing and filling the GlidePath unit should be undertaken at a carefully chosen site, away from any risk of
spillages draining into water courses or into environmentally sensitive areas. Children and animals must
always be kept away from mixing and filling operations.
