Transporter PLUS 11 MK 2, Driver Manual

Page: 9 / 40

Issue : - Man/P11,02 9 Last rev: 26.08.2010
Control handles
Lock release air buttons
OPERATING DECKS
Important! All personnel must be clear of the vehicle before operating any
controls.
LIFTING DECKS
1. Pull the relevant control handle towards you from its neutral position. The
deck should now raise as the handle is held in this position.
2. When the deck is at the required height, return the lever to the neutral position
then lower the deck onto the locking rack.
The deck must be supported by the locking rack, not by the chain or
hydraulic cylinders.
LOWERING DECKS
1. Pull the relevant control handle towards you from its neutral position, so that
the deck lifts enough to release the locking pawls on
both sides.
2. Press in and hold the relevant locking release air button.
3. Push the control handle away from you whilst keeping the air button de-
pressed, the deck should now lower. Always check the deck is lowering
evenly.
4. When the deck has reached its required level, return the lever to the neutral
position.
5. Release the air button to re-engage the deck locks.
6. Further lower the deck so that the pawl is supported by the locking rack.
The locking rack blocks are spaced at 50mm intervals.