Transpak TP-6000-1, Operation Manual & Spare Parts List

Page: 10 / 121

will cut off power automatically. For
In case of overload, the over load relay
This Timer, T1, determines
Magnetic switch 6
normal operation, please actuate
this switch.
Timers 7 & 8
Timer , T1 7
：
This is a current protection device.
the time necessary for strap take-up
Set Timer, T1, bearing in mind the time
required for strapping the minimum-size
package. Normally, Timer T1 is set
at about 0.4 seconds, but may have to be
adjusted depending on a package size.
This Timer, T2, determines Timer , T2 8
：
the time necessary for strap feed
If the time selected for Timer T2 is
too short, strap may not reach the
sealing position.
Normally, Timer T2 is set to about 0.8
seconds for standard arch (850x600), but
may have to be adjusted depending on
arch size.
-7-
5. Electric Control Unit
a. (For Three Phase)
01/18/08