Transpak GENESIS HORI TP-502MH, Operation, Safety & Spare Parts Manual, Page: 25 / 117

-A20-
5. Operating the Machine
(1) How to Load P.P Strap
Step 1
Please pay attention to the direction mark on the Outer Flange
○ 2
. Put a coil of strap into
the Inner Flange
○ 1
according to the direction mark. Then install the Outer Flange
○ 2
and tighten the reel nut handle
○ 3
. (refer to following drawing B)
Step 2
Pull out some strap to thread it through the roller
○ 4
on the Break Arm. Also thread strap
through two rollers
○ 5 ○ 6
.
Step 3
Turn on the power switch. Then push reset button
○ 7
to start up the machine and turning
the strap a little and let strap tip can feed smoothly into roller
○
8
about 10cm or longer.
(refer to following drawing B) Then push feed button
○
9
to feed the strap.
1
2
3
4
5
6
9
7
8
(Drawing B)