5
4. REAR PANEL CONNECTORS
1.
RF Input
: terminal for antenna or CATV coaxial cable.
2.
Video Component Input
: video terminal for Component Video (Y,Cr,Cb) signal.
3.
S-VIDEO Input
: video terminal for S-Video signal input.
4.
AV1 Input
: Audio & Video input terminal.
5.
AV Output
: Audio & Video output terminal.
Note: S-Video input, Video Component input & AV1 input share the AV1 audio input.
REMOTE CONTROLLER
1. MAINTENANCE OF THE REMOTE CONTROLLER
•
When the remote controller no longer
operates properly at normal viewing
distances, the batteries must be replaced.
•
If the remote controller is not to be used
for a long period of time, we recommend
removing the batteries to avoid
electrolyte leaking.
•
Do not mix new batteries with old ones,
different brands, or different type.
•
When the battery is exhausted,
electrolyte leakage may occur and
damage may be caused to the remote controller.
2. BATTERY INSTALLATION
•
Remove the battery cover.
•
Insert the two
“
AA
”
1.5V batteries with
the polarity matching with the mark
inside the battery compartment.
•
Close the battery cover.
Use of remote control
Point the remote control toward the infrared remote sensor on the main unit. If there
is an obstacle between the main unit and remote control, the remote control may
not operate effectively.
