CS 23-8 L
1×8 HDMI 4K2K Splitter
Quick Installation Guide
intrODuCtiOn:
This high performance HDMI splitter provide one HDMI in to
eight HDMI outputs and supports 4K2K, Full 3D, 12-bit Deep
Color as well as High Definition Lossless Audio. With its 3Gbps
bandwidth and the additional features of the latest HDMI stan
-
dards you can be sure of great HDMI distribution.
appLiCatiOnS:
● Simultaneously display one HDMI source on eight
TVs/projectors
● Showroom display
● University lecture hall display
● Retail sales display
fEaturES:
● Integrated HDCP decryption/encryption engines which are
compliant with HDCP Rev 1.3 specification
● Wide Frequency Range: 25MHz - 340MHz
● Supports HDTV resolutions up to 4K2K
● Supports 1080p@60Hz, Deep Color 12-bit
● Supports LPCM 7.1CH, and DTS-HD Master Audio
● Supports Full 3D
paCkagE COntEntS:
● 1 set 1×8 HDMI 4K2K Splitter
● 1×5 V/4A DC Power Supply Adaptor
● User Manual
SYStEM rEQuirEMEntS:
● HDMI equipped source devices such as a DVD/Blu-ray play
with HDMI cables or DVI to HDMI cables
● HDMI equipped displays (TVs or monitors) with HDMI cables
panEL DESCriptiOnS:
OpEratiOn:
1. Connect the HDMI cable from the HD source to the input
port of this HDMI Splitter.
2. Connect the HDMI cables from your displays (monitor or
projector) to the outputs of this Splitter.
3. Plug the 5VDC power supply into this HDMI Splitter.
4. Turn on the power then the HDTV signal will be distributed
to each HDTV display.
SpECifiCatiOnS:
Note: When displaying a 3D signal with a higher bandwidth than
225MHz or a 4K2K resolution source, a High Speed HDMI cable
is required.
COnnECtiOn DiagraM:
POWER SWITCH: The power switch turns the unit on and off. The
LED will illuminate to indicate that the switcher is ON.
POWER LED: The power LED will illuminate when the unit is
powered.
OUTPUT LEDS: These LEDs will illuminate when the HDMI out
-
puts are connected to the display with signal display on screen.
HDMI INPUT: Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top box.
HDMI OUTPUT: Connect each of the output ports to the HDMI
display for simultaneous HDMI distribution.
5V/DC, 4 A: Connect the 5 V/DC, 4 A power supply into the splitter
and plug the adaptor to AC wall outlet.
FRONT PANEL
REAR PANEL
-1-
-3-
-2-
-4-
Video Bandwidth:
340MHz / 10.2Gbps
Input Port:
1×HDMI (female connector)
Output Ports:
8×HDMI (female connector)
Output Resolution:
480i~1080p@50/60,
1080p@24/50/60,
VGA~UXGA, 4K 2K@30Hz
Chassis Material:
metal
Operating Temperature:
0 °C~40 °C/32 °F~104 °F
Storage Temperature:
−20 °C~60 °C/−4 °F~140 °F
Relative Humidity:
20~90% RH (non-condensing)
CS 23-8_manual d+e.indd 2
12.07.2016 10:54:26
