Transition TN-USB-FX-01, User Manual

Page: 9 / 25

Transition Networks TN-USB-FX-01 User Guide
33589 Rev. D https://www.transition.com/ Page 9 of 25
5. When the “ Completing the Found New Hardware Wizard ” screen displays, click the Finish button.
The wizard closes. If no error messages display, continue operation.
Error Messages
Message
:
A problem occurred during hardware installation. Your new hardware might not work
properly.
Meaning
: Tray message indicating a problem with your computer recognizing the device / driver.
Configuring flow control advertised capabilities does not apply; Auto-negotiation option not supported.
You cannot set the Ethernet link speed; you must force the device to 100 Mbps full duplex.
Recovery :
1. Remove the device from your computer.
2.
Uninstall the driver. See “ Uninstall the Driver Package ” on page 16 .
3. Change the “Speed & Duplex” and “FlowControl” driver parameters. See “ Driver Configurable
Parameters ” on page 17 .