Transition TN-USB-FX-01, User Manual

Page: 8 / 25

Transition Networks TN-USB-FX-01 User Guide
33589 Rev. D https://www.transition.com/ Page 8 of 25
Installing the Driver
Various Management features exist, depending on the OS and driver support. Standard OS support
includes Windows 7, 8 and 8.1 (32-bit and 64-bit). Other drivers are available from the ASIX Drivers site;
go to
https://www.asix.com.tw/en/product/USBEthernet/High-Speed_USB_Ethernet/AX88772A then
choose Downloads then Software & Tools to locate the driver for your OS. If the Windows OS is up to
date, the driver is automatically recognized and ready to go without additional effort. If the driver is not
automatically recognized, use one of the procedures in this section:
•
Typical Plug and Play Install below
•
Standard Windows Driver Update on page 10
•
Uninstall the Driver Package on page 16
•
Driver Configurable Parameters on page 17
Typical Plug and Play Install
This is the recommended default install procedure.
1. Plug the TN-USB-FX-
01 into the computer’s USB port. The Found New Hardware Wizard displays.
2. Check the Yes , this time only radio button.
3. Click the Next button. This screen displays:
4. With the “
Install the software automatically (Recommended
” radio button checked, click the Next
button. The Please wait while the wizard searches... message displays: