Token Ring 2-Port
Multi-Media Repeater
8
15
3. INSTALLATION
To install the Token Ring Multi-Media Repeater:
• Unpack the Token Ring Multi-Media Repeater
•
Install Multi-Media Repeater on flat surface
•
Install Slide In Cards (SICs)
•
Connect cable to SIC connectors
•
Set configuration switches
•
Power the Multi-Media Repeater.
Direction is provided in the pages that follow.
Unpacking the Token Ring Multi-Media Repeater
The Token Ring Multi-Media Repeater packing contents should include
the following:
Item
Part Number
Token Ring
Multi-Media Repeater
TR-MMR-2
Power Cord
3344, 3347, 3348, 3349, or 3523,
(depending upon power configuration
in country where installed)
User’s Guide
7363
In addition, any of the following optional SICs may be included:
Item
Part Number
Data Connector SIC
TR-DC-SIC
Fiber Optic
Ring In/Lobe In SIC
TR-FI-SIC
Fiber Optic
Ring Out/Lobe Out SIC
TR-FO-SIC
RJ-45 SIC
TR-RJ-SIC
RJ-45 Connection
The twisted pair slide-in card TR-RJ-SIC
can provide a cost-effective method for
eliminating jitter by connecting passive
hubs with active hubs and/or with
terminal equipment.
RJ CONNECTOR ACTIVE/PASSIVE RING EXTENSION
If the twisted pair slide-in card is installed in a Token Ring Multi-Media
Repeater which is connected in a ring extension installation to an
active hub, set Active/Passive switch on the twisted pair SIC to Active.
If the twisted pair slide-in card is installed in a Token Ring Multi-Media
Repeater which is connected in a ring extension installation to a
passive hub, set Active/Passive switch on the twisted pair SIC to
Active
Passive
UTP/STP
Token Ring
Slide In Card
TR-RJ-SIC
n e t w o r k s
T R A N S I T I O N
IN
OUT
RI RO
RI
RO
RI
RO
IN
OUT
