10
SPSVT26xx-10x
24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Cable Specifications
Fiber Cable
Bit Error Rate:
<10-9
Single mode fiber
(recommended)
:
9 µm
Multimode fiber
(recommended)
:
62.5/125 µm
Multimode fiber
(optional)
:
100/140, 85/140, 50/125 µm
SPSVT2611-100
1300 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11.0 dB
SPSVT2613-100
1300 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11.0 dB
SPSVT2614-100
1310 nm single mode
Fiber-optic Transmitter Power:
min: -15.0 dBm
max: -8.0 dBm
Fiber-optic Receiver Sensitivity:
min: -31.0 dBm
max: -8.0 dBm
Link Budget:
16.0 dB
SPSVT2615-100
1310 nm single mode
Fiber Optic Transmitter Power:
min: -8.0 dBm
max: -2.0 dBm
Fiber Optic Receiver Sensitivity:
min: -34.0 dBm
max: -7.0 dBm
Link Budget:
26.0 dB
SPSVT2629-100
1310 nm (TX) / 1550 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
SPSVT2629-101
1550 nm (TX) / 1310 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
SPSVT2629-102
1310 nm (TX) / 1550 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
SPSVT2629-103
1550 nm (TX) / 1310 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
The fiber optic transmitters on this device meet Class I Laser safety requirements per
IEC-825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.
[email protected] -- Click the “Transition Now” link for a live Web chat.
11
Cable Specifications
— Continued
Copper Cable
•
Copper twisted-pair, 28 AWG, 120 Ohm, 12 pf/foot capacitance
(max)
•
Nominal DC resistance: 65.0 ohms per 1000 feet
(each conductor)
•
Shield type: Aluminum Foil-Polyester Tape/Braid Shield with drain wire
•
Standard Cable length: 3 m
(10 ft.)
The five high-speed serial cables
(available from Transition Networks)
that are
compatible with the 26-pin copper port on the SPSVT26xx-10x Device are the
following:
•
RS-232
•
RS-449
•
V.35
•
X.21
•
RS-530
Note:
Please refer to the cable specifications documentation on-line at
www.transition.com.
