User’s Guide
SPSVT26xx-10x
Stand Alone Device
•
High-Speed Serial
• V.35/X.21/RS449/RS530/RS232
• Copper to Fiber
Transition Networks SPSVT26xx-10x
series high-speed serial copper-to-fiber
Device connect V.35, X.21, RS-449, RS-
530, or RS-232 signals on copper cable, at
speeds up to 10 Mb/s, through a universal 26-pin serial interface connector to fiber-optic
cable. Transition Networks also supplies cables for connecting network equipment to the
SPSVT26xx-10x series Device.
Cable Options . . . . . . . . . . . . . . . . . .3
Installation . . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . .9
Cable Specifications . . . . . . . . . . . . .10
Technical Specifications . . . . . . . . . .12
Troubleshooting . . . . . . . . . . . . . . .13
Contact Us . . . . . . . . . . . . . . . . . . .15
Compliance Information . . . . . . . . .16
Part Number
Port One - Copper Port Two - Duplex Fiber-Optic
SPSVT2611-100
Universal 26-pin
serial interface*
ST, 1300 nm multimode
2 km
(1.2 miles)**
SPSVT2613-100
Universal 26-pin
serial interface*
SC, 1300 nm multimode
2 km
(1.2 miles)**
SPSVT2614-100
Universal 26-pin
serial interface*
SC, 1310 nm single mode
20 km
(12.4 miles)**
SPSVT2615-100
Universal 26-pin
serial interface*
SC, 1310 nm single mode
40 km
(24.9 miles)**
* For typical maximum cable distance, see Cable Specifications section.
** Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.
The chassis version of this Device is CPSVT26xx-10x. For more information, see the
user’s guide for the CPSVT26xx-10x on-line at www.transition.com
