Transition Networks
SM24T6DPA Web User Guide
33664 Rev. B
Page
9
of
26
Ethernet Cabling
To ensure proper operation when installing the switch into a network, make sure that the
current cables are suitable for 100BASE-TX or 1000BASE-T operation. Check the following
criteria against the current installation of your network:
•
Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP) cable with RJ-
45 connectors; Category 5 or Category 5e with maximum length of 100 meters is
recommend 100BASE-TX, and Category 5e or 6 with maximum length of 100 meters is
recommend for 1000BASE-T.
•
Protection from radio frequency interference emissions.
•
Electrical surge suppression.
•
Separation of electrical wires and data based network wiring.
•
Safe connections with no damaged cables, connectors or shields.
RJ-45 Connections
SFP Transceiver
Equipment Checklist
After unpacking this switch, check the contents to be sure you have received all the
components. Then, before beginning the installation, be sure you have all other necessary
installation equipment.
Package Contents
•
SM24T6DPA Management Switch
•
Four adhesive rubber feet
•
Mounting Accessory (for 19” Rack Shelf)
•
Documentation Post card
•
Printed Quick Start Guide
•
AC Power Cord
•
RS-232 to RJ-45 Console Cable
Notify your sales representative immediately if any of these items are missing or damaged
