Transition Networks
SM24T6DPA Web User Guide
33664 Rev. B
Page
14
of
26
Connecting to a Power Source
You can plug or remove the power cord from an AC power socket to turn power on and off.
Inserting the Power Cord to AC Power Socket
Step 1. Insert the power cable plug directly into the AC Socket located at the back of the
switch.
Step 2. Plug the other end of the cable into a grounded, 3-Pin, AC power source.
Step 3. Check the front-panel LEDs as the device is powered on to be sure the POWER LED is
lit. If not, check that the power cable is correctly plugged in.
WARNING
: For International use, you may need to change the AC line cord. You must
use a line cord set that has been approved for the socket type in your country.
