Transition Networks
SM24T6DPA Web User Guide
33664 Rev. B
Page
12
of
26
Desktop or Shelf Mounting:
Step 1. Attach the four adhesive rubber feet to the bottom of the first switch.
Step 2. Set the device on a flat surface near an AC power source; make sure there are at least
two inches of space on all sides for proper air flow.
Step 3. If installing a single switch only, go to “Connecting to a Power Source” at the end of
this chapter.
Step4. If installing multiple switches, attach four adhesive feet to each one. Place each device
squarely on top of the one below, in any order.
Installing an Optional SFP Transceiver
You can install or remove an SFP without having to power off the switch. The SFP is hot-
pluggable. Inserting an SFP Transceiver into an open SFP slot:
Step 1. Consider network and cabling requirements to select an appropriate SFP transceiver.
Step 2. Insert the transceiver with the optical connector facing outward and the slot
connector facing down. Note that SFP transceivers are keyed so they can only be installed in
one orientation.
Step 3. Slide the SFP transceiver into the slot until it clicks into place.
NOTE
: SFP transceivers are not provided in the switch package.
