Transition Networks
SISTF10xx-111-LR(T) Industrial Media Converter
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
10
Wall mounting
Wall mount
bracket
The Media Converter includes a wall mount bracket and screws in the contents of the shipping
package. The wall mount bracket can be attached to the rear panel of the Media Converter to
enable mounting to a vertical surface such as the wall of an enclosure. Locate the bracket (1)
and screws (6) and follow the steps below to install the bracket on the Media Converter.
Wall mount
bracket install
To install the wall mount bracket to the Media Converter, see Figure 6 and do the following:
Step
Action
1.
Remove existing screws (3) and DIN-Rail bracket from rear of Media Converter.
2.
Locate wall mount bracket and screws (6) from Media Converter packaging.
3.
Place bracket in correct orientation as shown and insert and tighten screws to
secure bracket to rear of Media Converter.
4.
Mount assembled device to a wall per locally accepted practices for anchoring
and securing. (Wall mount screws not included.)
Figure 6: Installing wall mount bracket to Industrial Media Converter
Remove screws and
DIN rail bracket
Locate wall mount
brackets and screws
1
2
3
Screw bracket onto rear
of Media Converter
Summary of Contents for SISTF10xx-111-LR
Page 2: ......
