background image

*Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.

Note: 

The chassis version of the media converter is CGETF10xx-11x. For more

information, see the CGETF10xx-1xx user’s
guide on-line at: www.transition.com.

User’s Guide

SGETF10xx-1xx 

Stand-Alone Media Converter

Gigabit Ethernet

• Copper to Fiber
• 1000Base-T to 1000Base-SX/LX

Transition Networks SGETF10xx-1xx Gigabit
Ethernet media converter connects 1000Base-T
shielded or unshielded twisted-pair copper cable to
1000Base-SX or 1000Base-LX, fiber-optic cable.
The SGETF10xx-1xx is a stand-alone media
converter

Installation  . . . . . . . . . . . . . . . . . . . . .3
Operation  . . . . . . . . . . . . . . . . . . . . .7
Cable Specifications . . . . . . . . . . . . . .9
Technical Specifications . . . . . . . . . .11
Troubleshooting  . . . . . . . . . . . . . . .12
Contact Us  . . . . . . . . . . . . . . . . . . .13
Compliance Information  . . . . . . . . .15

Part Number

Port One - Copper Port Two - Duplex Fiber-Optic

SGETF1013-110

RJ-45 1000Base-T
100 m 

(328 ft)*

SC, 1000Base-SX, 850 nm multimode
220 m 

(721 ft)* (62.5/125 

µ

m cable)

550 m 

(1,804 ft)* (50/125 

µ

m cable)

SGETF1014-110

RJ-45 1000Base-T
100 m

(328 ft)*

SC, 1000Base-LX, 1310 nm single mode
10 km

(6.2 miles)

*

SGETF1015-110

RJ-45 1000Base-T
100 m 

(328 ft)*

SC, 1000Base-LX, 1310 nm single mode
25 km (15.5 miles)*

SGETF1017-110

RJ-45 1000Base-T
100 m 

(328 ft)*

SC, 1000Base-LX, 1550 nm single mode
65 km 

(40.4 miles)

*

SGETF1024-110

RJ-45 1000Base-T
100 m 

(328 ft)*

SC, 1000Base-SX, 1310 nm extended
multimode, 2 km

(1.2 miles)*

Note:

62.5/125 

µ

(fiber only)

SGETF1035-110

RJ-45 1000Base-T
100 m 

(328 ft)*

SC, 1000Base-LX, 1550 nm single mode
125 km 

(77.5 miles)*

Summary of Contents for SGETF1013-110










Reviews: