* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network.
Part Number
Port One -
Copper
Port Two -
Duplex Fiber-Optic
SCSCF3011-100
75 ohm coax (BNC)
ST, 1300 nm multimode
2 km (1.2 miles)*
SCSCF3013-100
75 ohm coax (BNC)
SC, 1300 nm multimode
2 km (1.2 miles)*
SCSCF3014-100
75 ohm coax (BNC)
SC, 1310 nm singlemode
20 km (12.4 miles)*
SCSCF3015-100
75 ohm coax (BNC)
SC, 1310 nm singlemode
40 km (24.8 miles)*
SCSCF3016-100
75 ohm coax (BNC)
SC, 1310 nm singlemode
60 km (37.3 miles)*
SCSCF3017-100
75 ohm coax (BNC)
SC, 1550 nm singlemode
80 km (49.7 miles)*
SCSCF3018-100
75 ohm coax (BNC)
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
SCSCF3019-100
75 ohm coax (BNC)
LC, 1310 nm single mode
20 km (12.4 miles)*
SCSCF3029-100
75 ohm coax (BNC)
SC, 1310 mn (TX)/1550 nm (RX)
20 km (12.4 miles)*
SCSCF3029-101
75 ohm coax (BNC)
SC, 1550 mn (TX)/1310 nm (RX)
20 km (12.4 miles)*
SCSCF3029-100
and
-101
are intended to be installed in the same network where
one is the local converter and the other is the remote converter.
User’s Guide
SCSCF30xx-10x
Stand-Alone Media Converter
•
DS3 or T3 / E3
•
Coax (BNC) to Fiber
Transition Networks SCSCF30xx-10x series
media converters encode and decode
DS3
or
E3
coax copper signals over fiber optic cable
to extend the distance and transmission
reliability of high-speed
DS3
or
E3
data traffic.
The SCSCF30xx-10x also connects remote
locations via
T3/E3
cable.
NOTE:
The
CCSCF30xx-10x
model is the
chassis version of the media converter. For
more information, see the CCSCF30xx-10x
user’s guide on-line at www.transition.com.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Compliance Information . . . . . . .12
