Transition Networks SAPTF33 series, User Manual

Page: 2 / 7

2
SAPTF33xx-1xx
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Unit A - SAPTF33xx-100
Unit A (SAPTF33xx-100) connects to a Central Office (CO) telephone line or a
PBX (Private Branch Exchange). It mimics a telephone device (Line-Side FXS) and
has the ability to detect ringing voltages. The available models are:
Product Number Port One - Copper
Twisted-Pair
Port Two - Duplex Fiber-Optic
SAPTF3311-100 RJ-11C connector
5 km (3.1 miles)* ST connector, 1300 nm multimode
2 km (1.2 miles)*
SAPTF3313-100 RJ-11C connector
5 km (3.1 miles)* SC connector, 1300 nm multimode
2 km (1.2 miles)*
SAPTF3314-100 RJ-11C connector
5 km (3.1 miles)* SC connector, 1310 nm single mode
20 km (12.4 miles)*
SAPTF3315-100 RJ-11C connector
5 km (3.1 miles)* SC connector, 1310 nm single mode
40 km (24.9 miles)*
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
Unit A is also available in single mode, single fiber models.
Product Number Port One - Copper
Twisted-Pair
Port Two - Fiber-Optic
Single Mode, Single Fiber
SAPTF3329-100 RJ-11C connector
5 km (3.1 miles)* SC, 1310 nm (TX) / 1550 nm (RX),
20 km (12.4 miles)*
SAPTF3329-101 RJ-11C connector
5 km (3.1 miles)* SC, 1550 nm (TX) / 1310 nm (RX),
20 km (12.4 miles)*
SAPTF3329-102 RJ-11C connector
5 km (3.1 miles)* SC, 1310 nm (TX) / 1550 nm (RX),
40 km (24.9 miles)*
SAPTF3329-103 RJ-11C connector
5 km (3.1 miles)* SC, 1550 nm (TX) / 1310 nm (RX),
40 km (24.9 miles)*
If this model is installed as Unit A : Install this model as Unit B :
SAPTF3329-100 SAPTF3329-111
SAPTF3329-101 SAPTF3329-110
SAPTF3329-102 SAPTF3329-113
SAPTF3329-103 SAPTF3329-112
The single mode, single fiber models are designed to be installed in pairs.
The table below lists which models should be installed in the same
network for the
standard configuration (see page 4).:
3 techsupport@transition.com Click the “ Transition Now ” link for a live Web chat.
Unit B - SAPTF33xx-110
Unit B (SAPTF33xx-110), the reciprocal unit to unit A, connects to a telephone
device and mimics a Central Office (Customer-Side FXO). The available models
are:
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
Unit B is also available in single mode, single fiber models.
Product Number Port One - Copper
Twisted-Pair
Port Two - Fiber-Optic
Single Mode, Single Fiber
SAPTF3329-110 RJ-11C connector
5 km (3.1 miles)* SC, 1310 nm (TX) / 1550 nm (RX),
20 km (12.4 miles)*
SAPTF3329-111 RJ-11C connector
5 km (3.1 miles)* SC, 1550 nm (TX) / 1310 nm (RX),
20 km (12.4 miles)*
SAPTF3329-112 RJ-11C connector
5 km (3.1 miles)* SC, 1310 nm (TX) / 1550 nm (RX),
40 km (24.9 miles)*
SAPTF3329-113 RJ-11C connector
5 km (3.1 miles)* SC, 1550 nm (TX) / 1310 nm (RX),
40 km (24.9 miles)*
If this model is installed as Unit B : Install this model as the other Unit B :
SAPTF3329-110 SAPTF3329-111
SAPTF3329-111 SAPTF3329-110
SAPTF3329-112 SAPTF3329-113
SAPTF3329-113 SAPTF3329-112
The single mode, single fiber models are designed to be installed in pairs. The
table below lists which models should be installed in the same network for the
automatic ring-down configuration (see page 4).:
Product Number Port One - Copper
Twisted-Pair
Port Two - Duplex Fiber-Optic
SAPTF3311-110 RJ-11C connector
5 km (3.1 miles)* ST connector, 1300 nm multimode
2 km (1.2 miles)*
SAPTF3313-110 RJ-11C connector
5 km (3.1 miles)* SC connector, 1300 nm multimode
2 km (1.2 miles)*
SAPTF3314-110 RJ-11C connector
5 km (3.1 miles)* SC connector, 1310 nm single mode
20 km (12.4 miles)*
SAPTF3315-110 RJ-11C connector
5 km (3.1 miles)* SC connector, 1310 nm single mode
40 km (24.9 miles)*