Transition Networks SAPTF33xx-1xx POTS to fiber-optic media converter connects
central-office voice-grade signals to distant POTS (Plain Old Telephone Service)
equipment using standard telephone signaling. It can extend, over fiber, the
distance between two voice path communication devices by up to 40 km using
either single mode or multimode fiber cable.
The SAPTF33xx-1xx provides audio transmission, caller ID, ringing at the distant
end and automatic ring-down. Two units are required to implement an end-to-end
system. An RJ-11 female connector provides the electrical interface between the
media converter and the telephone device.
NOTE:
The the
chassis version
of the
media converter is
CAPTF33xx-1xx
. For
more information, see the CAPTF33xx-
1xx user’s guide on-line at:
www.transition.com.
SAPTF33xx-1xx in the Network . .4
Installation . . . . . . . . . . . . . . . . . .5
Operation . . . . . . . . . . . . . . . . . . .9
Cable Specifications . . . . . . . . . .11
RJ-11C Connector Specifications 12
Technical Specifications . . . . . . .12
Troubleshooting . . . . . . . . . . . . .13
Consumer Information . . . . . . . .14
Compliance Information . . . . . . .16
POTS to Fiber Optic
Stand Alone Media Converter
SAPTF33xx-1xx
User’s Guide
