N-FX Series Fast Ethernet NICs
4
Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours
Cable Specifications
Fiber cable
Bit error rate:
<10-9
Single mode fiber
(recommended)
:
9 µm
Multimode fiber
(recommended)
:
62.5/125 µm
Multimode fiber
(optional)
:
100/140, 85/140, 50/125 µm
N-FX-ST-02(x), N-FX-SC-02(x),
N-FX-LC-02(x)
1300 nm multimode
Fiber optic transmitter power:
min: -19.0 dBm max: -14.0 dBm
Fiber optic receiver sensitivity:
min: -31.0 dBm max: -17.0 dBm
Link budget:
12.0 dB
N-FX-LC20-02
1310 nm multimode
Fiber optic transmitter power:
min: -15.0 dBm
max: -8.0 dBm
Fiber optic receiver sensitivity:
min: -31.0 dBm max: -16.0 dBm
Link budget:
16.0 dB
N-FX-MT-02(x)
1300 nm multimode
Fiber optic transmitter power:
min: -19.0 dBm max: -14.0 dBm
Fiber optic receiver sensitivity:
min: -31.0 dBm max: -17.0 dBm
Link budget:
12.0 dB
N-FX-SC5-02(x)
1310 nm single mode
Fiber optic transmitter power:
min: -19.0 dBm max: -14.0 dBm
Fiber optic receiver sensitivity:
min: -31.0 dBm
max: -7.5 dBm
Link budget:
12.0 dB
N-FX-SC20-02(x)
1310 nm single mode
Fiber optic transmitter power:
min: -15.0 dBm
max: -8.0 dBm
Fiber optic receiver sensitivity:
min: -31.0 dBm
max: 0.0 dBm
Link budget:
16.0 dB
N-FX-SB201-02(x)
1310 TX/1550 RX nm single mode
single stand
Fiber optic transmitter power:
min: -14.0 dBm
max: -8.0 dBm
Fiber optic receiver sensitivity:
min: -32.0 dBm
max: 0.0 dBm
Link budget:
18.0 dB
N-FX-SB202-02(x)
1550 TX/1310 RX nm single mode
single stand
Fiber optic transmitter power:
min: -14.0 dBm
max: -8.0 dBm
Fiber optic receiver sensitivity:
min: -32.0 dBm
max: 0.0 dBm
Link budget:
18.0 dB
The fiber optic transmitters on the device meet Class I Laser safety requirements
per IEC-825/CDRH standard and comply with 21CRF1040.10 and
21CRF1040.11.
[email protected] -- Click the “Transition Now” link for live Web chat.
5
Technical Specifications
For models N-FX-xxxx-02 and N-FX-xxxx-02(L)
Standards:
IEEE 802.3
Expansion bus standard:
PCI 2.1, 2.2
Data rate
100Mbps fiber media
LED:
LINK/ACT
(on the bracket)
ON = communication link; FLASHING = activity
on link
FDX
(full duplex link);
ON = full duplex link
Drivers:
• Windows 95, 98, ME, 2000, 2003. XP, NT4.0
• NDIS 2, 3, 4, 5
• NetWare Server 3.12, 4.x, 5x, 6.x
• Netware DOS Client ODI
• MAC OS
• Linux x86, x64
• FreeBSD 3.2, 4.x, 5.x
• SOC Unixware 7.1, OpenUnix 8
• SCO Open Server ..x
• Solaris 8, 9, 10
Boot server support:
PXE, RPL, Netware NCP/IPX, DHCP, BootP
PCB dimensions:
2.2”W x 4.8”D x 0.9”H
(55.9 mm x 121.9 mm x 23 mm)
Weight:
3 oz.
(91g)
approximate
Power consumption:
1.0A @ +5VDC
MTBF
184,743 hours
(Bellcore7 V5.0)
Opearting temp:
0°C to 50°C
(32
°
F to 122°F)
Storage temp:
-25°C to 85°C
(-13
°C
to 185°F)
Humidity:
5% to 90%, non-condensing
Altitude:
0 to 10,000 feet
Warranty:
Lifetime
WARNING: Visible and invisible laser radiation when open: DO NOT stare into
the beam or view directly with optical instruments. Failure to observe this warning
could result in damage to your vision or blindness.
CAUTION: Use of controls, adjustments, or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
The information in this manual is subject to change without further notice.
