MICROSOFT WINDOWS NT 4.0 - NEW INSTALLATION
1.
Install the Transiton (EFA020X series) Adapter card in accordance with your personal
computer user's manual. Again, follow all handling procedures to avoid electro-static
discharges.
2.
Start Windows NT, and open the control panel by clicking "Start," then "Settings," then
"Control Panel."
3.
Double Click on "Network."
4.
Click on the Adapters tab.
5.
Click "Add" inside the Network control panel, then select "Adapter."
6.
Select "Have Disk."
7.
Insert the Transition Driver Disk into the drive
8.
For the NDIS3 MAC driver, type at the prompt:
"A:\Winnt_Mini3\" and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Winnt_Mini4\" and click "OK."
9.
Choose the appropriate Transition Netowks – LANart ( EFA020X) Adapter and Click on
"OK"
10.
Click on "Properties" - Choose the appropriate properties as required by the Network
Administrator for the driver to work properly.
Click "Close" - Protocols may need to be configured. Please see your Network
Administrator for details
11.
Select "OK" to exit the Network control panel, and Select "OK" when prompted to restart
your machine. Remove the Transition Driver Disk.
12.
If this is your first adapter installation, you will be prompted to insert your original
Windows NT CD. Insert the CD, and click "OK" to begin copying files.
13.
Restart the computer. Your LANart adapter is now configured. To access your network,
protocols may need to be configured. Please see your network administrator for details.
10
