Declaration of Conformity
Name of Mfg:
Transition Networks
10900 Red Circle Drive, Minnetonka MN 55343 U.S.A.
Model:
J/E-CF-02 Series Media Converters
Part Number(s):
J/E-CF-02, J/E-CF-02(SC), J/E-CF-02(SM)
Regulation:
EMC Directive 89/336/EEC; U.S.A. CFR
Purpose: To declare that the
J/E-CF-02 to which this declaration refers is in
conformity with the following standards.
EN 55022:1998 Class A; EN 55024:1998; FCC Part 15 subpart B; EN 61000-3-
2:2000; EN 61000-3-3:1995+A1:2001
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
April, 2007____
Stephen Anderson, Vice-President of Engineering
Date
2
24-hour Technical Support: 1-800-260-1312 Int’l: 00-1-952-941-7600
[email protected] -- Click the “Transition Now” link for a live web chat.
7
J/E-CF-02
Installation
Install the fiber cable
1.
Locate a 10Base-FL fiber cable with male, two-stranded TX to RX
connectors installed at both ends.
2.
Connect the fiber cables to the J/E-CF-02 media converter as described:
•
Connect the male TX cable connector to the female TX port.
•
Connect the male RX cable connector to the female RX port.
3.
Connect the fiber cables to the other device
(another media converter,
hub, etc.)
as described:
•
Connect the male TX cable connector to the female RX port.
•
Connect the male RX cable connector to the female TX port.
Install the copper cable
Note:
Connections between the J/E-CF-02 and a hub, or a switch require
straight-through cable. Connections between the J/E-CF-02 and a
terminal, transceiver, router, or NIC require crossover cable cable.
(See page 4 for copper cable specifications.)
Failure to observe this
caution will cause data transfer to fail.
1.
Locate or build 10Base-T copper cables with male, RJ-45 connectors
installed at both ends.
2.
Connect the RJ-45 connector at one end of the cable to the RJ-45 port on
the J/E-CF-02 media converter.
3.
Connect the RJ-45 connector at the other end of the cable to the RJ-45
port on the other device
(switch, workstation, etc.).
Contact Us
Technical Support
Technical support is available 24 hours a day.
US and Canada:
1-800-260-1312
International:
00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto www.transition.com and click the Transition Now link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto www.transition.com and click the Learning Center link.
Ask a question anytime by sending an e-mail to our technical support staff.
[email protected]
Address
Transition Networks
10900 Red Circle Drive Minnetonka MN 55343, U.S.A.
telephone:
952-941-7600
toll free:
800-526-9267
fax:
952-941-2322
