Twinax to Fiber
12
7
5250 Repeater
2. Install balun at Terminal 5250 Repeater twinax connector.
3. Connect male RJ-11 or RJ-45 plug connector at one end of
twisted pair cable to balun on Terminal 5250 Repeater twinax
connector.
UTP to RJ-11 or RJ-45:
If connecting to RJ-11 or RJ-45
connector on terminal equipment
(as on PowerStar™):
4. Connect other male RJ-11 or
RJ-45 plug connector to RJ-11
or RJ-45 female connector on
terminal equipment.
UTP to Twinax:
If connecting to twinax connector
on terminal equipment (as on
PowerStar™):
4. Install balun at terminal
equipment twinax connector.
5. Connect other male RJ-11 or
RJ-45 plug connector to balun installed on terminal equipment
twinax connector.
UTP
Terminal
5250 Repeaters
Connecting Host Signal to Host 5250 Repeater
Connect the AS/400™, S/3X, or 5x94 host to the Host 5250 Repeater
using either twinax cable or UTP cable and baluns.
Twinax Connection
To connect twinax cable between AS/400™, S/3X, or 5x94 host and
Host 5250 Repeater:
1. Locate or build twinax cable that conform to cable
specifications and with male twinax connectors installed at
both ends. (See page 20)
2. Connect twinax connector at one end of twinax cable to host
twinax connector.
3. Connect twinax connector at other end of twinax cable to Host
5250 Repeater twinax connector.
UTP
Host
5250 Repeaters
Twinax
ALL cable connectioms to the 5250
Repeater MUST be AT LEAST 7.6 meters
(25 feet) in length.
