Model 0402
8
7
Ethernet™ Pocket Hub™
3. INSTALLATION
NOTE: 0402 Ethernet Pocket Hub Link Integrity cannot be
disabled. All devices connected to the Pocket Hub MUST have
link functions enabled.
To install the 0402 Ethernet Pocket Hub:
• Unpack the 0402 Pocket Hub.
•
Connect 10BaseT Cable to the 0402 Pocket Hub.
•
Connect the 0402 Pocket Hub to power.
Direction is provided in the pages that follow.
Unpacking the 0403 Pocket Hub
The 0402 Ethernet Pocket Hub packing contents should include the
following:
Item
Part Number
0402 Pocket Hub
E-TBT-HB-0402
Power Supply Adapter
3518, 3517, 3516, 3515, or 3514,
(depending upon power configuration
in country where installed)
User’s Guide
7349
Connecting 10BaseT Cable
To connect 10BaseT Cable to Pocket Hub RJ-45 connectors:
1. Locate or build 10BaseT cables with the following
characteristics:
•
803.2 compliant (See page 14)
•
correct (straight through or crossover) cable configuration
for site installation (See page 7)
•
male RJ-45 plug connectors installed at both ends of
cable.
2. Connect male RJ-45 plug connector at one end of 10BaseT
cable to Pocket Hub RJ-45 jack connector.
3. Connect male RJ-45 plug connector at other end of 10BaseT
cable to DTE terminal RJ-45 jack connector (using straight
through cable orientation) or to Pocket Hub RJ-45 jack
connector (using crossover cable orientation).
Connecting to External Hub through Wall Outlet
Use a crossover cable to connect Pocket Hub to the wall plate.
Use a straight through cable to connect Pocket Hub to terminal
devices.
wall plate
#1
Ethernet
™
Pocket Hub
™
networks
TRANSITION
Mpls, MN 55344
Straight-through 10BaseT
Crossover 10BaseT
