Transduction TR-LCD1900-ITX-7, User Manual

Page: 83 / 107

3.12 Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Phoenix-Award BIOS CMOS Setup Utility
►
Stand CMOS Features
►
Advanced BIOS Features
►
Advance Chipset Features
►
Integrated Peripherals
►
Power Management
►
PnP/PCI Configuration
►
PC Health Status
Load Fail-Safe Default
Load Optimized Default
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc :Quit
↑↓← → ：
Select Item F10:Save & Exit Setup
Pressing “
Y ” stores the selections made in the menus in
CMOS – a special section of memory that stays on after
you turn your system off. The next time you boot your
computer, the BIOS configures your system according to
the Setup selections stored in CMOS. After saving the
values the system is restarted again.
3.13 Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Phoenix-Award BIOS CMOS Setup
Utility
►
Stand CMOS Features
►
Advanced BIOS Features
►
Advance Chipset Features
►
Integrated Peripherals
►
Power Management
►
PnP/PCI Configuration
►
PC Health Status
Load Fail-Safe Default
Load Optimized Default
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc :Quit
↑↓← → ：
Select Item F10:Save & Exit Setup
This allows you to exit Setup without storing in CMOS
any change. The previous selections remain in effect.
This exits the Setup utility and restarts your computer.
SAVE to CMOS and EXIT (Y/N)? Y
Quit Without Saving (Y/N)? N
82 TR-LCD1900-ITX-7 User Manual