Transduction TR-LCD1900-ITX-7, User Manual, Page: 68 / 107

If Parallel Port Mode Select is [ECP] will show:
Phoenix-Award BIOS CMOS Setup Utility
Super IO Device
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [IrDA]
RxD , TxD Active [Hi, Lo]
IR Transmission Delay [Enabled]
UR2 Duplex Mode [Half]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ ECP ]
x EPP Mode Select 1.7
ECP Mode Use DMA [3]
PWRON After PWR-Fail [Off]
Item Help
Menu Level ►
↑↓← → ：
Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit F1:General
Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
ECP Mode Use DMA
If your system supports ECP parallel port mode and you
have the port set to use ECP, you must use this setting to
assign a DMA channel for use by the port.
The choice: 1, 3
(default) .
67 TR-LCD1900-ITX-7 User Manual