Transduction TR-5190-PM, User Manual

Page: 47 / 108

LANLED Connectors
The 4-pins LANLED connector designed for each LAN port is for
applications need to display LAN port status on front panel or the places
administrators are easy to access.
4 1
LAN LED
LAN LED
Pin #
Signal Name
1 ACTLED-
2 LINKLED-
3 ORGLED-
4 GRNLED-
AT Power P8 Connector
The following table describes the pin assignment of on-board AT
Power P8 connector. This connector is for the applications which do
not require a backplane. Users can connect it to an AT SPS P8
connector to supply the system power. The Power good signal will be
generated by the circuit on the SBC card. Pin 1 is replace with +5V
power to increase supply current.
1
Pin # Signal Name
1 +5V
2 +5V
3 +12V
4 -12V
5 GND
6 GND
43 TR-5190 User Manual